炭化タングステン型
(15)
セメントで接合されていた炭化タングステンの摩耗の部品
価格: Raw sintered between 38-68usd/kg, special tools can be negotiable
MOQ: Small qty of amples are available.
納期: Standard products in one week, special tools in 45 days
ブランド: OED or OEM
ハイライト:Cemented Tungsten Carbide Wear Parts, DIN Tungsten Carbide Wear Parts, ISO Tungsten Carbide Wear Parts
Non-Magnetic Cemented Carbide Molds Parts Ni Binder Wear Parts Conventional tungsten carbide mold products are weakly magnetic, and non-magnetic cemented carbide molds are required under special conditions. For example, the upper cavity of the magnetic ring rotor used in the AR-8 magnetic ring roto... もっと見る
➤ 訪問 Webサイト
精密0.005の終了する地上の炭化タングステンのローラー
価格: Raw sintered between 38-68usd/kg, special tools can be negotiable
MOQ: Small qty of amples are available.
納期: Standard products in one week, special tools in 45 days
ブランド: OED or OEM
ハイライト:0.005 Tungsten Carbide Rollers, Ground Tungsten Carbide Rollers
Finished Ground Polished Carbide Roller As Carbide Precision Mold Parts Precision mould parts: Grinding parts with precision less than 0.002 Precise EDM parts with precision less than 0.005 OED uses high-quality sintered blanks, which can make the products have high hardness and wear resistance, ... もっと見る
➤ 訪問 Webサイト
2200 TRSの炭化タングステン型
価格: Raw sintered between 38-68usd/kg, special tools can be negotiable
MOQ: Small qty of amples are available.
納期: Standard products in one week, special tools in 45 days
ブランド: OED or OEM
ハイライト:2200 TRS Tungsten Carbide Mould, G20 Tungsten Carbide Mould, Tungsten Carbide Mold G20
Tungsten Carbide Precision Mold Core Precision Mould Parts Battery Mould Parts As the core part of the new energy production equipment, the finished tungsten carbide mold core is mainly determined by its good physical properties. The tungsten carbide material itself has good and stable physical prop... もっと見る
➤ 訪問 Webサイト
AISIの標準的な炭化タングステン型
価格: Raw sintered between 38-68usd/kg, special tools can be negotiable
MOQ: Small qty of amples are available.
納期: Standard products in one week, special tools in 45 days
ブランド: OED or OEM
ハイライト:AISI Tungsten Carbide Mould, DIN Tungsten Carbide Mould, G40 Carbide Mold Components
Carbide Mould Punching Pin Tungsten Carbide Precision Mold Parts Carbide Mold Components OED uses high-quality sintered blanks, which can make the products have high hardness and wear resistance, good toughness, high inner hole smoothness, good surface smoothness of stretched products, low friction... もっと見る
➤ 訪問 Webサイト
炭化タングステンの引きの棒円形の型半分はG20高力炭化物型を分ける
価格: Raw sintered between 38-68usd/kg, special tools can be negotiable
MOQ: Small qty of amples are available.
納期: Standard products in one week, special tools in 45 days
ブランド: OED or OEM
ハイライト:Tungsten Carbide Pull Rod Mold HRA 89.5, Tungsten Carbide Mould G20, Tungsten Carbide Mould Ra 0.1
Half Round Rod Tungsten Carbide Pull Rod Mold Parts G20 High Strength Carbide Mold Cemented carbide molds are used as mechanical equipment parts with high requirements for industrial production. They are commonly used as cemented carbide stamping molds, cemented carbide progressive molds, cemented ... もっと見る
➤ 訪問 Webサイト
打つ型の上のG30炭化タングステンは磨かれた型の部品をつける
価格: Raw sintered between 38-68usd/kg, special tools can be negotiable
MOQ: Small qty of amples are available.
納期: Standard products in one week, special tools in 45 days
ブランド: OED or OEM
ハイライト:Tungsten Carbide Polished Mold Parts, Carbide Mould parts G30
G30 Tungsten Carbide Up Punching Molds Seat Polished Mold Parts Outer diameter 45mm +0.05mm Innder diameter 16mm -0.005mm Height 30mm +0.2mm The roughness of inner diameter Ra 0.1 Polished inner diameter for precision mold parts. we specialized in producing Punches, Ejector Pins and sleeves, Die Bu... もっと見る
➤ 訪問 Webサイト
OED G20の炭化物の穿孔器および0.002精密出版物型のための死ぬため
価格: Raw sintered between 38-68usd/kg, special tools can be negotiable
MOQ: Small qty of amples are available.
納期: Standard products in one week, special tools in 45 days
ブランド: OED or OEM
ハイライト:G20 Carbide Punch And Die, OED Carbide Punch And Die
Carbide Punch And Die Punch And Die For Press Mold Ejector Precision Mold Parts we specialized in producing Punches,Ejector Pins and sleeves,Die Buttons,Bushes,Ejector Punches,Drill Rods, Ball Cages,Springs,Block Sets of many different standards Cemented carbide molds are used as mechanical equipme... もっと見る
➤ 訪問 Webサイト
懸命の非磁気炭化タングステンの部品は金型用板材ISO 9001の証明書を
価格: Raw sintered between 38-68usd/kg, special tools can be negotiable
MOQ: Small qty of amples are available.
納期: Standard products in one week, special tools in 45 days
ブランド: OED or OEM
ハイライト:Non Magnetic Tungsten Carbide Parts, Tungsten Carbide Parts Hard Mold Base, ISO 9001 Tungsten Carbide Parts
Non-Magnetic Tungsten Carbide Super Hard Mold Base For Precision Mold Parts With Nickel as binder, we can ge no-magnetic carbide tools. The corrosion resistance and mechanical properties of the product can be well improved Our material and tolerance: 1. Co content: 10%-20%. 2. Density g/cm3: 14.0～1... もっと見る
➤ 訪問 Webサイト
磨かれた炭化タングステンの穿孔器およびリングHV30 1000を保護するため
価格: Raw sintered between 38-68usd/kg, special tools can be negotiable
MOQ: Small qty of amples are available.
納期: Standard products in one week, special tools in 45 days
ブランド: OED or OEM
ハイライト:Polished Tungsten Carbide Punches, Tungsten Carbide Punches Protect Rings, HV30 1000 Tungsten Carbide Punches
Carbide Punching Head And Protect Rings Polished Precision Mold Parts we specialized in producing Punches,Ejector Pins and sleeves,Die Buttons,Bushes,Ejector Punches,Drill Rods, Ball Cages,Springs,Block Sets of many different standards Precision mould parts: Grinding parts with precision less than ... もっと見る
➤ 訪問 Webサイト
RA 0.2の精密炭化タングステンピン直径10mmの長さ150mm
価格: Negotiable
MOQ: 1pc
納期: 1 week
ブランド: OED/OEM is available
ハイライト:Ra 0.2 Tungsten Carbide Pins, 10mm Tungsten Carbide Pins, 150mm tungsten carbide pin
Carbide Precision Punching Pin Carbide Mold Parts Tungsten Part Components Diameter Dia 10mm Length: 150mm Carbide punching pins, customized sizes are available. Co Density Hardness (HRA) TRS (Wt %) (g/cm3) (≥N/mm²) 9.0-11.0 14.33-14.53 88.6-90.2 2800 15.5-16.0 13.84-14.04 85.6-87.2 2800 14.7-15.3 1... もっと見る
➤ 訪問 Webサイト
半終了する炭化タングステン型、92のHRAの炭化タングステンのプレフォーム
価格: Raw sintered between 38-68usd/kg, special tools can be negotiable
MOQ: Small qty of amples are available.
納期: Standard products in one week, special tools in 45 days
ブランド: OED or OEM
ハイライト:Semi Finished Tungsten Carbide Mould, 92 HRA Tungsten Carbide Mould, 92 HRA Tungsten Carbide Preforms
Semi-Finished Production Of Carbide Die Preforms Carbide Precision Mold Parts 1. Co content: 10%-20%. 2. Density g/cm3: 14.0～14.5. 3. Hardness: 87-92.0HRA. 4. Grain size: 0.6-1.6um. 5. Bending strength: 3200-4000MPa. 6. Elastic modulus GPa: 490. 7. Thermal expansion coefficient 10-6/℃: 5.4. 8. Rese... もっと見る
➤ 訪問 Webサイト
鋼鉄部品のためのプレフォームの炭化タングステン型0.005の精密
価格: Raw sintered between 38-68usd/kg, special tools can be negotiable
MOQ: Small qty of amples are available.
納期: Standard products in one week, special tools in 45 days
ブランド: OED or OEM
ハイライト:Preforms Tungsten Carbide Mould, Steel Parts Tungsten Carbide Mould, Tungsten Carbide Mould 0.005
Carbide Preforms Mold Parts Semi-Finished Carbide Mould For Steel Parts Our material and tolerance: 1. Co content: 10%-20%. 2. Density g/cm3: 14.0～14.5. 3. Hardness: 87-92.0HRA. 4. Grain size: 0.6-1.6um. 5. Bending strength: 3200-4000MPa. 6. Elastic modulus GPa: 490. 7. Thermal expansion coefficien... もっと見る
➤ 訪問 Webサイト
炭化タングステン型の鋼鉄内部の直径180mmを処理することを死になさい
価格: Raw sintered between 38-68usd/kg, special tools can be negotiable
MOQ: Small qty of amples are available.
納期: Standard products in one week, special tools in 45 days
ブランド: OED or OEM
ハイライト:Die Processing Tungsten Carbide Mould, 180mm Tungsten Carbide Mould
Carbide Die Processing Tungsten Steel Inner Diameter Concave Die Precision Mold Parts we specialized in producing Punches,Ejector Pins and sleeves,Die Buttons,Bushes,Ejector Punches,Drill Rods, Ball Cages,Springs,Block Sets of many different standards Tungsten carbide mold processing precision custo... もっと見る
➤ 訪問 Webサイト
RA 0.05磨かれた炭化タングステンのモールド・ガイドのローラーの高い硬度
価格: Raw sintered between 38-68usd/kg, special tools can be negotiable
MOQ: Small qty of amples are available.
納期: Standard products in one week, special tools in 45 days
ブランド: OED or OEM
ハイライト:Tungsten Carbide Mould Guide Roller, Polished Tungsten Carbide Mould, Ra 0.05 tungsten carbide roller
Ra 0.05 Polished Carbide Precision Roller Plastic Mold Parts Guide Roller Precision mould parts: Grinding parts with precision less than 0.002 Precise EDM parts with precision less than 0.005 OED uses high-quality sintered blanks, which can make the products have high hardness and wear resistance... もっと見る
➤ 訪問 Webサイト
G40炭化タングステン型、精密炭化物ガイドのブッシュ
価格: Raw sintered between 38-68usd/kg, special tools can be negotiable
MOQ: Small qty of amples are available.
納期: Standard products in one week, special tools in 45 days
ブランド: OED or OEM
ハイライト:G40 Tungsten Carbide Mould, Tungsten Carbide Mould Guide Bushings, Precision Carbide Guide Bushings
Carbide Guide Bushing Tungsten Carbide Precision Mould Part Precision mould parts: Grinding parts with precision less than 0.002 Precise EDM parts with precision less than 0.005 Facilities advantage: EDM Cutter 15 sets Grinder 15 sets Wire-cuting 3 sets CNC 2 Sets Milling machine 1 set OED uses hi... もっと見る
➤ 訪問 Webサイト