中国の工場
>
機械
>
...
>
炭化物の製粉の挿入物
(49)
よく赤い硬度ISOの炭化物の製粉はM10炭化物用具の挿入物を挿入する
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:Uncoated ISO Carbide Milling Inserts, Carbide Milling Inserts M10, M10 Carbide Tool Inserts
Better Red Hardness And Better Versatility Carbide Milling Inserts Product Description: when cutting metal with carbide cutting tools, especially when cutting steel continuously, chips do not roll up as they are. Not because the chip is too hard, but because the chip length will change. At the same ... もっと見る
➤ 訪問 Webサイト
14.6 G/Cm3炭化物の製粉はステンレス鋼のためにK40注文の炭化物を挿入する挿入する
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:14.6 G/Cm3 Carbide Milling Inserts, Carbide Milling Inserts K40, K40 Custom Carbide Inserts
K30-K40 Suitable For Stainless Steel And Cast Iron Carbide Milling Inserts Grade Information: Santon Grade Density(g/cm³) TRS(n/mm²) HRA Performance & Applications ISO Code Other Grade Chian ST1030 14.6 2300 90.5 Good toughness, high strength, able to withstand larger impact loads, suitable for ... もっと見る
➤ 訪問 Webサイト
2800 TRSの構造の鋼鉄を製粉するためのISOの炭化物の挿入物を大体の形にするK40
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:K40 Roughing ISO Milling Inserts, Carbide Inserts For Milling 2800 TRS, CVD Coated Inserts 2800 TRS
ISO Grade K40 Suitable For Roughing Of Alloy Structure Steel Carbide Milling Inserts Product Description: Our advantages: 1, Vertical blade mold is the most complete domestic and foreign counterparts in the enterprise. 2, With accurate carbon control technology, internal quality assurance is higher ... もっと見る
➤ 訪問 Webサイト
2800 TRSギヤ フライスは90HRA高い抗張鋼鉄を切る金属のための超硬合金の挿入物を
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:2800 TRS Cemented Carbide Inserts, Carbide Inserts For Metal Cutting 90HRA, 90HRA Carbide milling Tips
For Carbon Steel High-Tensile Steel Machining Carbide Milling Inserts Product Description: Gear milling using high rigid disc cutter, the characteristics of the process is interrupted cutting In addition to the changes on the cutting edge of thermal, mechanical requirements in the appropriate balanc... もっと見る
➤ 訪問 Webサイト
光沢が無いP35炭化物の製粉はIscarを取り替えるための90.5 HRA Sandvikの炭化物の挿入物を挿入する
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:Uncoated P35 Carbide Milling Inserts, Carbide Milling Inserts 90.5 HRA, Sandvik Carbide Inserts 90.5 HRA
Sandvik Kenner Metal And Iscar Equivalent Carbide Milling Inserts Grade Information: Santon Grade ISO Grade ANSI Grade Physical and Chemical Property Performance & Applications Density TRS Hardness g/cm3 n/mm2 HRA YT535 P25~P35 C1 12.7 1980 90.5 High toughness, high red hardness and strength. Su... もっと見る
➤ 訪問 Webサイト
完全な輝やきK20のチタニウムの炭化タングステンの製粉はCVD PVD YG6ビットを挿入する
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:Titanium Tungsten Carbide Milling Inserts, Carbide Milling Inserts CVD PVD, CVD PVD YG6 Bit
Tungsten Carbide Carbides And Titanium Carbides Carbides Carbide Milling Inserts Grade Information: Santon Grade ISO Grade ANSI Grade Physical and Chemical Property Performance & Applications Density TRS Hardness g/cm3 n/mm2 HRA YG6 K20 C2 14.9 2050 90.5 High wear resistance, better impact and s... もっと見る
➤ 訪問 Webサイト
YG8熱衝撃の炭化物の製粉用具は耐衝撃性を挿入する
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:Thermal Shock Carbide Milling Tool Inserts, YG8 Carbide Milling Tool Inserts, YG8 Carbide turning milling insert
Excellent Resistance To Impact And Thermal Shock Carbide Milling Inserts Grade Information: Santon Grade ISO Grade ANSI Grade Physical and Chemical Property Performance & Applications Density TRS Hardness g/cm3 n/mm2 HRA YG8 K30 C1 14.7 2520 90 High strength, better impact and shock resistance, ... もっと見る
➤ 訪問 Webサイト
93.5固体炭化物を作るためのHRAの炭化物の製粉の挿入物突起を作り出す
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:93.5 HRA Carbide Milling Inserts, Carbide Milling Inserts Producing Protuberance, 93.5 HRA Carbide Turning Inserts
Fine Grinding And Coating Process Non-Metallic Materials Carbide Milling Inserts Grade Information: Santon Grade Performance typical value Characteristics & Applications ISO Code Equivalent Grades Density (g/cm3) TRS (N/mm2) Hardness (HRA) ST1020 14.95 2800 93.5 Extra fine substrate, high wear r... もっと見る
➤ 訪問 Webサイト
耐熱性ANSI C6の炭化物の製粉は表面の仕上げを挿入する
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:ANSI C6 Carbide Milling Inserts, Surface Finishing Carbide Milling Inserts, ANSI C6 carbide cutters for lathe tools
High Heat Resistance And High Quality Surface Finishes Carbide Milling Inserts Grade Information: Santon Grade ISO Grade ANSI Grade Physical and Chemical Property Performance & Applications Density TRS Hardness g/cm3 n/mm2 HRA YT14 P20 C6 11.4 1750 91.5 High strength, good impact and shock resis... もっと見る
➤ 訪問 Webサイト
M20半終わり91.5HRAを製粉するためのIndexable炭化物の挿入物
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:M20 Indexable Carbide Inserts, Indexable Carbide Inserts 91.5HRA, 91.5HRA Carbide Inserts For Milling
Various Cutting Tool For Semi-Finishing Of Ordinary Steel Carbide Milling Inserts Product Description: Carbide cutting tools, especially indexable carbide cutting tools, is the dominant production of nc machining tool, since the 1980 s, a variety of monolithic and indexable carbide cutting tools, or... もっと見る
➤ 訪問 Webサイト
挿入物を切る鋳鉄の金属のための半終わりM20炭化物の製粉の挿入物
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:M20 Carbide Milling Inserts, Carbide Milling Inserts For Cast Iron, M20 Metal Cutting Inserts
M20-M30 For Semi Finishing Of Ordinary Steel And Cast Iron Carbide Milling Inserts Product Description: Advantages Vertical blade mold is the most complete domestic and foreign counterparts in the enterprise. With accurate carbon control technology, internal quality assurance is higher than the peer... もっと見る
➤ 訪問 Webサイト
93.2HRA K05 K10の炭化物の製粉はPVD CVDを塗った精密地面のための挿入物に挿入する
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:K05 K10 Carbide Milling Inserts PVD, 93.2HRA Carbide Milling Inserts, K05 K10 CVD Coated Inserts
Suffer Impact Load And Mechanical Friction For Cast Iron Carbide Milling Inserts Grade Information: Santon Grade Density(g/cm³) TRS(n/mm²) HRA Performance & Applications ISO Code Other Grade Chian ST1010 14.8 2500 93.2 Suitable for semi-finishing, and finishing of cast iron and non-ferrous metal... もっと見る
➤ 訪問 Webサイト
P30炭化物の製粉の挿入物のW Coチタニウムは半終わりの炭素鋼を合金にする
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:P30 Carbide Milling Inserts, Carbide Milling Inserts W Co Ti Alloy, P30 cemented carbide inserts
W-Co-Ti Alloys Semi-Finish Planning Of Carbon Steel Carbide Milling Inserts Grade Information: Santon Grade ISO Grade ANSI Grade Physical and Chemical Property Performance & Applications Density TRS Hardness g/cm3 n/mm2 HRA YT5 P30 C5 12.9 2200 90.5 Best strength, high impact and shock resistanc... もっと見る
➤ 訪問 Webサイト
K15微粒子WCは機械化の冷やされた鋳鉄91.5HRAを挿入する
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:K15 Fine Grain WC Inserts, WC Inserts For Machining Chilled, Carbide Insert Tips 91.5HRA
Fine Grain WC Alloy For Machining Chilled Cast Irons Carbide Milling Inserts Product Description: Indexable plane fine milling cutter is generally used in machine tool guide surface, engine and other box joint surface, steam turbine surface clamping plate and other requirements of higher flatness, p... もっと見る
➤ 訪問 Webサイト
90.4~91.5Hardness P30のIndexable摩耗の靭性の炭化物の製粉の挿入物
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:P30 Indexable Milling Inserts, Indexable Milling Inserts PVD, P30 PVD Coated Inserts
Replace Sandvik, Kenner Metal, Iska, Shangao Carbide Milling Inserts Grade Information: Santon Grade ISO Grade ANSI Grade Physical and Chemical Property Performance & Applications Density TRS Hardness g/cm3 n/mm2 HRA ZP25 P20~P30 C6 C5 12.6 1950 91.5 A reasonable match of wear resistance and tou... もっと見る
➤ 訪問 Webサイト
外的な回転挿入物を製粉する91.5HRA ISO標準の炭化物への90.4
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:90.4 HRA Carbide Milling Inserts, Carbide Milling Inserts 3300 N MM2, 90.4 HRA Indexable Milling Inserts
Good Resistance To Impact Vibration And Wear Carbide Milling Inserts Product Description: Extra fine substrate,high strength,good resistance to impact,vibration and wear resistance,good red hardness,roughing and heavy milling for gray cast iron,nodular cast iron, non-ferrous metal,roughing for non-m... もっと見る
➤ 訪問 Webサイト
P40抵抗力がある製粉の炭化物のIndexable先端のすばらしい切削抵抗の高温
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:P40 Milling Carbide Indexable Tips, Great Cutting Force Carbide Indexable Tips, P40 carbide inserts for metal cutting
Bear Great Cutting Force And High Temperature Carbide Milling Inserts Product Description: In the process of metal cutting, hard alloy cutting tools not only bear great cutting force and high temperature, but also suffer impact load and mechanical friction. Therefore, hard alloy cutting tool materia... もっと見る
➤ 訪問 Webサイト
ANSI C5の終わりの炭化物の製粉の挿入物の振動抵抗力がある金CVDは挿入物に塗った
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:ANSI C5 Finishing Carbide Milling Inserts, Vibration Resistant Carbide Milling Inserts, ANSI C5 Golden CVD Coated Inserts
Better Impact And Vibration Resistance Finishing Carbide Milling Inserts Grade Information: Santon Grade ISO Grade ANSI Grade Performance & Applications ST2030 P25~P45 C6~C5 CVD coating, golden. Very high strength and toughness edge matrix, in optimal combination with TiC, AI2O3, TiN coating. A ... もっと見る
➤ 訪問 Webサイト
P25非金属材料のふしの鋳鉄を処理する大体の形になる炭化物の製粉の挿入物
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:Roughing Carbide Milling Inserts, Nodular Cast Iron Carbide Milling Inserts, P25 Carbide Tool Tips
Nodular Cast Iron And Roughing For Non-Metallic Materials Carbide Milling Inserts Product Description: P25 : Good red hardness, excellent resistance to impact and thermal shock, high strength, heavy roughing for steels and cast steels. Features and applications: 1. Double-sided four-edge design, eff... もっと見る
➤ 訪問 Webサイト
ISOのマンガン鋼鉄Ingersoll製粉の挿入物の高い抗張鋼鉄外面の回転
価格: Negotiable
MOQ: 50
納期: 15-25 working days
ブランド: Santon
ハイライト:Manganese Steel Ingersoll Milling Inserts, External Turning Ingersoll Milling Inserts, ISO Carbide Milling Tool Inserts
Ingersoll Manganese Steel High-Tensile Steel Carbide Milling Inserts Product Description: Carbide Milling Inserts is widely used in the mechanical field. It plays a very important role in the transmission of large torque and high load, or in changing the direction of power transmission. Especially i... もっと見る
➤ 訪問 Webサイト