非球面の親水性のアクリルIOLの眼内レンズ12.5mmの全面的な直径
価格: Negotiation
MOQ: 500 pcs
納期: 40 days
ブランド: UV-LENS
ハイライト:118.4 IOL Intraocular Lens, Dia 12.5mm IOL Intraocular Lens, Aspheric Hydrophilic Acrylic Intraocular Lens
Aspheric Hydrophilic Acrylic Intraocular Lens An intraocular lens implant is a synthetic, artificial lens placed inside the eye that replaces the focusing power of a natural lens that is surgically removed, usually as part of cataract surgery ARE IOLS APPROVED BY THE FOOD AND DRUG ADMINISTRATION (FD... もっと見る
➤ 訪問 Webサイト
視覚Dia 5.5mm PC156C55 PMMAの眼内レンズのPolymethylメタクリル酸塩PMMA IOL
価格: negotiation
MOQ: 500 pcs
納期: 45 days
ブランド: UV-Lens
ハイライト:PC156C55 PMMAの眼内レンズ, 視覚Dia 5.5mm PMMAの眼内レンズ, 5.5mm Polymethylのメタクリル酸塩PMMA IOL
Polymethyl Methacrylate (PMMA) Intraocular Lens WHY IS AN IOL USED? When the natural lens is removed, much of the eye's focusing ability is lost. To restore vision, the loss of focusing power is usually replaced by one of three methods. The first method is the use of glasses (spectacles). The requir... もっと見る
➤ 訪問 Webサイト
2% HPMCのHydroxypropylメチルセルロースの分散眼の粘弾性がある装置
価格: negotiation
MOQ: 1000
納期: 20 days
ブランド: UV-Gel
ハイライト:2% HPMCのHydroxypropylメチルセルロース, 分散眼のHydroxypropylメチルセルロース, HPMCの眼の粘弾性がある装置
Dispersive Viscosurgical Devices HPMC Dispersive Viscosurgical Devices HPMC is a transparent viscoelastic solution of high viscidity made of non-protein polymeric carbohydrate.Dispersive Viscosurgical Devices HPMC is used to help make cataract surgical procedures more successful. During phaco surger... もっと見る
➤ 訪問 Webサイト
紫外線30D親水性の眼内レンズ360度の正方形の端
価格: Negotiation
MOQ: 500 pcs
納期: 40 days
ブランド: UV-LENS
ハイライト:UV 30D Hydrophilic Intraocular Lens, Square Edge Hydrophilic Intraocular Lens, 360 Degree Square Edge Hydrophilic IOL
Hydrophilic Acrylic Foldable IOL Implants An intraocular lens (or IOL) is a tiny, artificial lens for the eye. It replaces the eye's natural lens that is removed during cataract surgery. The lens bends (refracts) light rays that enter the eye, helping you to see. Your lens should be clear. But if yo... もっと見る
➤ 訪問 Webサイト
+30.0DのDiopterへの-8.0D激流のための3部分の眼内レンズ
価格: negotiation
MOQ: 500 pcs
納期: 50 days
ブランド: UV-Lens
ハイライト:+30.0DのDiopter 3部分の眼内レンズ, -8.0DのDiopter 3部分のiol, PMMA激流のための3部分レンズ
3 Pieces PMMA Intraocular Lens 3 pieces PMMA Intraocular Lens have the optic manufactured separately from the haptics with the haptics then implanted into the optic material. Haptics may extend from the optic at various angles, usually between 0°–10° of angulation. Haptics play a role in the positio... もっと見る
➤ 訪問 Webサイト
PCF60/Aの非球面の親水性の眼内レンズ12.5mmの全面的な直径
価格: Negotiation
MOQ: 500 pcs
納期: 40 days
ブランド: UV-LENS
ハイライト:PCF60A Hydrophilic Intraocular Lens, Aspherical Hydrophilic Intraocular Lens, 12.5mm Overall Diameter hydrophilic iol
Aspherical Hydrophilic Acrylic Intraocular Lens Brand UV-LENS What is hydrophobic and hydrophilic IOL? Both hydrophilic and hydrophobic have been commonly used in cataract surgeries. Hydrophobic acrylic IOLs have a long track record of good PCO rate . However, due to the mechanical properties, hydro... もっと見る
➤ 訪問 Webサイト
親水性のアクリルの非球面の眼内レンズ6.0mmの折り畳み式のPC IOLレンズ
価格: Negotiation
MOQ: 500 pcs
納期: 40 days
ブランド: UV-Lens
ハイライト:Hydrophilic Acrylic aspheric intraocular lenses, 12.5mm aspheric intraocular lenses, 6.0mm Foldable PC IOL Lens
Aspherical Hydrophilic Acrylic Posterior Chamber Foldable Intraocular Lens Aspherical Hydrophilic Acrylic Posterior Chamber Foldable Intraocular Lens adopts the world's top hydrophilic acrylate material from Contamac UK, which has excellent material uniformity, good biocompatibility, smooth surface,... もっと見る
➤ 訪問 Webサイト
柔らかいアクリルの眼内レンズ
価格: negotiation
MOQ: 1000 pcs
納期: 7 working days
ブランド: Universe IOL
ハイライト:柔らかいアクリルの眼内レンズ, PCF60アクリルの眼内レンズ, 12.5mmのアクリルのiol
is a single-piece positerior chamber IOL, foldable, modified C-loop, made from 2-HEMa-co-MMA (hydroxyethyl methacrylate/methyl methacrylate copolymer) material, with uv absorbent added. Optical design: single focus, spherical/aspherical. Technical Parameters: Model PCF60 PCF60/A Overall Diameter 12.... もっと見る
➤ 訪問 Webサイト
ISO13485 1.5%ゲル ナトリウムHyaluronate眼1.0ml
価格: negotiation
MOQ: 1000 pcs
納期: 30 days
ブランド: UV-HA
ハイライト:1.5%眼ゲル ナトリウムHyaluronate, ナトリウムHyaluronate眼1.0ml, ISO13485ゲル ナトリウムHyaluronate
1.5% Ophthalmic Sodium Hyaluronate Gel 1.0ml is made of sodium hyaluronate physiological balanced saline solution. Sodium hyaluronate was extracted by microbial fermentation. The product helps surgeons maintain the anterior chamber and protect ocular tissue during cataract surgery. Injected prior to... もっと見る
➤ 訪問 Webサイト
非球面の親水性のアクリルの眼内レンズ
価格: Negotiation
MOQ: 500 pcs
納期: 40 days
ブランド: UV-LENS
ハイライト:非球面の親水性のアクリルの眼内レンズ, 12.5mmの親水性のアクリルの眼内レンズ, 6.0mmの親水性のアクリルのiol
The natural lens of the eye is an aspheric shape. However, many traditional IOLs have a spheric shape, which can induce minor optical imperfections, which can affect the quality of the vision they provide. Premium aspheric IOLs are widely considered to be much closer to the natural curvature of the ... もっと見る
➤ 訪問 Webサイト
互換性があるISO13485 6.8PH-7.6PHのHydroxypropylメチルセルロース
価格: USD3.50-5.00
MOQ: 1000
納期: 30 days
ブランド: UV-Gel
ハイライト:7.6PH Hydroxypropylメチルセルロース, 6.8PH Hydroxypropylメチルセルロース, ISO13485 Hydroxypropylメチルセルロース
Hydroxypropyl Methylcellulose Hydroxypropyl methylcellulose (UV-Gel) is a transparent viscoelastic solution of high viscidity made of non-protein polymeric carbohydrate, with the pH value of 6.8～7.6,approaching the physical pH of the human boby, and the dynamic viscosity is 5,000-15,000mpa·s, which ... もっと見る
➤ 訪問 Webサイト
OVDs無色の凝集のナトリウムのHyaluronateの眼の粘弾性がある装置
価格: negotiation
MOQ: 1000 pcs
納期: 30 days
ブランド: UV-HA
ハイライト:OVDs凝集のナトリウムHyaluronate, 無色の凝集のOVDs, OVDs凝集の眼の粘弾性がある装置
Cohesive OVDs Sodium Hyaluronate Cohesive OVDs Sodium Hyaluronate is more solid than liquid, and they have the consistency of gelatin, which means that they cannot coat or flow as well. However, because they are much thicker, they are able to maintain space and pressurize the eye quite well. This is... もっと見る
➤ 訪問 Webサイト
一定した118.2 PMMAの眼内レンズはCのループを変更した
価格: negotiation
MOQ: 500 pcs
納期: 45 days
ブランド: UV-Lens
ハイライト:118.2 PMMAの眼内レンズ, 12.5mm PMMAの眼内レンズ, 変更されたCのループPMMA IOLs
PMMA Intraocular Lens The true beginning of the IOL is the Second World War. Against a backdrop of the Battle of Britain, where aircraft fought for air supremacy in the skies over the south of England, Harold Ridley was a civilian ophthalmologist who operated on Royal Air Force pilots with eye injur... もっと見る
➤ 訪問 Webサイト
高位非球面の折り畳み式IOLの眼内レンズ12.75mmの全長
価格: Negotiation
MOQ: 500 pcs
納期: 40 days
ブランド: UV-LENS
ハイライト:Aspheric IOL Intraocular Lens, 12.75mm IOL Intraocular Lens, 12.75mm aspheric intraocular lens
High-order Aspheric Foldable Intraocular Lens Product Parameters Product High-order Aspherical Hydrophilic Acrylic Intraocular Lens Manufacturer Henan Universe IOL R&M Co., Ltd Model PCF60/AL Overall Length (mm) 12.75 Optic diameter (mm) 6.0 Material Hydrophilic Acrylic Optical design Monofocal,... もっと見る
➤ 訪問 Webサイト
6mmの折り畳み式の後部の部屋の眼内レンズの単一部分球形IOL
価格: negotiation
MOQ: 1000 pcs
納期: 7 working days
ブランド: Universe IOL
ハイライト:6mm Foldable Posterior Chamber Intraocular Lens, Monofocal foldable posterior chamber intraocular lens, 118.4 Single Piece Spherical IOL
One Piece Posterior Chamber Foldable Lens One Piece Posterior Chamber Foldable Lens is optical implant, which is made from hydrophilic acrylate material (copolymer of HEMA and MMA). The material has excellent tough performances and tensile to keep nature moderate dehydration time, while the material... もっと見る
➤ 訪問 Webサイト
視野の訂正のための非球面の光学折り畳み式の眼内レンズ人工的なレンズ
価格: Negotiation
MOQ: 500 pcs
納期: 40 days
ブランド: UV-LENS
ハイライト:Aspheric Optical Foldable Intraocular Lens, PCF60 Foldable Intraocular Lens, 12.5mm Artificial Lens For Vision Correction
Foldable Intraocular Lens Aspheric Optical Design In 1949, first intraocular lens (IOL) insertion after cataract surgery was performed by Sir Harold Ridley, in London. Only in the 1970s, the IOL insertion after cataract surgery began to be a standard procedure. The material the first IOL-s were comp... もっと見る
➤ 訪問 Webサイト
外科非球面の親水性の前もって積まれた眼内レンズのaphakia
価格: Negotiation
MOQ: 500 PCS
納期: 45 days
ブランド: UV-Lens
ハイライト:親水性の前もって積まれた眼内レンズ, 非球面の前もって積まれた眼内レンズ, Aphakiaの外科前もって積まれた眼内レンズ
Aspheric Hydrophilic Preloaded Intraocular Lens Product Parameter Product Name Preloaded Injectable Intraocular Lenses Model P-PCF60/A Material Hydrophilic Acrylic Optic Diameter 6.0mm Overall Diameter 12.5mm A Constant 118.4 Haptic angle 5° Incision size of preloaded injection system 2.2mm Power ra... もっと見る
➤ 訪問 Webサイト
6.5mmの後部の部屋の眼内レンズ
価格: negotiation
MOQ: 500 pcs
納期: 60 days
ブランド: UV-Lens
ハイライト:6.5mmの後部の部屋の眼内レンズ, 118.2後部の部屋の眼内レンズ, 30Dスリー ピースのIOLのレンズ
Three Piece Posterior Chamber PMMA Intraocular Lens The Universe IOL is an optical implant made of improved PMMA medical to correct the diopter of the eye without a natural lens. Design features: 1- The IOL produced by our company is made of PMMA, allowing the good flexibility of the loops,which can... もっと見る
➤ 訪問 Webサイト
堅いPolymethylメタクリル酸塩PMMA IOL
価格: negotiation
MOQ: 500 pcs
納期: 45 days
ブランド: UV-Lens
ハイライト:Polymethylメタクリル酸塩PMMA IOL, 堅いPMMA IOL, 5.5mm堅いIOL
The first IOL, implanted in 1949, was made of polymethyl methacrylate (PMMA). It is a rigid, nonfoldable material with less than 1% water content.So the safety and stability of the PMMA have been verified. Penetration by aqueous humor has been noted to cause small vacuoles within the lens optic. Thi... もっと見る
➤ 訪問 Webサイト
1.0ml透明なナトリウムのHyaluronateのゲルの眼の粘弾性がある装置
価格: USD 6.00-8.00
MOQ: 1000 pcs
納期: 30 days
ブランド: UV-HA
ハイライト:1.0ml透明なナトリウムのHyaluronateのゲル, ナトリウムのHyaluronateの眼ゲル, ナトリウムのHyaluronateの眼の粘弾性がある装置
Medical Sodium Hyaluronate Gel Medical Sodium Hyaluronate Gel is a transparent viscoelastic solution with high molecular weight, the linked disaccharide is composed of D-glucuronic acid and N-acetyl-D-glucosamine. The preparation is a degradable polysaccharide biomaterial used in the ophthalmologic ... もっと見る
➤ 訪問 Webサイト