中国の工場
>
機械
>
...
>
掘削マッド捨てる
(45)
証明されるスラリーの泥の分離APIのためのハイドロサイクロンの鋭い泥捨てる
価格: Negotiable
MOQ: 1 Pc
納期: Within 10 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, sand removal system
Hydrocyclone Drilling Mud Desander for Slurry Mud Separation API Certificated Brief Introduction Desander is the second class cleaning device for a whole solids control system. It sits on mud tank for separate drilling cuttings 47-76 micron. The untreated mud will feed into desander cone at the hori... もっと見る
➤ 訪問 Webサイト
制御鋭い泥のDesander固体200 M3/H容量1510 * 1360 * 2250mm
価格: Negotiable
MOQ: 1 Pc
納期: Within 20 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, desanding equipment
Solid Control Drilling Mud Desander 200 M3/H Capacity 1510 * 1360 * 2250mm Main Profile Drilling mud desander is a kind of solid control equipment, which is commonly used in oil and gas field for drilling rigs. Drilling mud desander can be widely applied in the triple-process of the drilling fluid a... もっと見る
➤ 訪問 Webサイト
最下の頁岩のシェーカーDN125mmの入口の直径が付いている密集した石油開発の泥Desander
価格: Negotiable
MOQ: 1 Pc
納期: Within 20 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, desanding equipment
Compact Oil Drilling Mud Desander With Bottom Shale Shaker DN125mm Inlet Diameter Introduction Mud Desander is important equipment for drilling liquid solid control. It is mainly used for the second phase purification of drilling liquid. It removes nocuous solid, stabilizes drilling liquid propertie... もっと見る
➤ 訪問 Webサイト
TRZS60はシェーカーの鋭い泥Desander 45um - 75um分離ポイント--に底を付けます
価格: Negotiable
MOQ: 1 Pc
納期: Within 20 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, desanding equipment
TRZS60 Bottom Shaker Drilling Mud Desander 45um - 75um Separation Point Introduction Mud Desander is the secondary solids control device for drilling fluids,it is mainly used to remove harmful solid particles with a particle size of 47-74μm in the drilling fluid.Using the principle of centrifugal se... もっと見る
➤ 訪問 Webサイト
個人化されたハイドロサイクロンの鋭い泥捨てるのシェーカーのDesanding最下の機械
価格: Negotiable
MOQ: 1 Pc
納期: Within 20 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, sand removal system
Personalized Hydrocyclone Drilling Mud Desander , Bottom Shaker Desanding Machine Product Introduction Mud desander has already been one of TR’s main products that ever requested very often from clients. TRCS series desander overcomes the shortcomings of the original desanding process. It consists o... もっと見る
➤ 訪問 Webサイト
高性能のDN200mmの出口への横の方向訓練の捨てる DN150mmの入口
価格: Negotiable
MOQ: 1 Pc
納期: Within 20 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, desanding equipment
High Efficiency Horizontal Directional Drilling Desander DN150mm Inlet to DN200mm Outlet Main Introduction Drilling Mud Desander is the secondary solids control device for drilling fluids. It is mainly used to remove harmful solid particles with a particle size of 47-74μm in the drilling fluid. Usin... もっと見る
➤ 訪問 Webサイト
スキッド取付けられた砂の取り外しシステム、高容量の鋭い泥のDesanding装置
価格: Negotiable
MOQ: 1 Pc
納期: Within 10 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, desanding equipment
Skid-Mounted Sand Removal System , High Capacity Drilling Mud Desanding Equipment Product Introduction Mud Desander is the second phase solids control equipment in drilling operation. Generally, there are a set of hydrocyclones in 8”, 10” or 12” in the desander, which mainly used for separating the ... もっと見る
➤ 訪問 Webサイト
トレンチレスのトンネルを掘る構造の鋭い泥の捨てる 0.25-0.4Mpaの働き圧力
価格: Negotiable
MOQ: 1 Pc
納期: Within 10 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, desanding equipment
Trenchless Tunneling Construction Drilling Mud Desander 0.25-0.4Mpa Working Pressure Main Introduction TR Solids Control is a professional manufacturer of mud desander. Our TRCS series desander is a kind of hydrocyclone desander composed of hydrocyclone and shale shaker. It is the second cphase soli... もっと見る
➤ 訪問 Webサイト
0.25 - 0.4Mpa砂の取り外しシステム、モーターDrived振動Desanding機械
価格: Negotiable
MOQ: 1 Pc
納期: Within 20 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, desanding equipment
0.25 - 0.4Mpa Sand Removal System , Vibrating Motor Drived Desanding Machine Brief Introduction Mud Desander is also called Drilling Fluid Desander. Hydrocyclone, shale shaker and cyclone pipe make up the desander. It is the second class solids control equipment to treat drilling fluids, mainly used... もっと見る
➤ 訪問 Webサイト
高容量のトレンチレスのトンネルを掘ることのための適用範囲が広い鋭い泥の捨てるの速い関係
価格: Negotiable
MOQ: 1 Pc
納期: Within 20 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, desanding equipment
High Capacity Flexible Drilling Mud Desander Fast Connection for Trenchless Tunneling Main Introduction Drilling fluids desander is a kind of hydrocyclone desander composed of hydrocyclone and shale shaker. It is the second class solids control equipment to treat drilling fluids, mainly used for sep... もっと見る
➤ 訪問 Webサイト
200m3/h 10"泥の循環システムのためのサイクロンの鋭い泥捨てる
価格: Negotiable
MOQ: 1 Pc
納期: Within 10 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, sand removal system
High Capacity 200m3/h 10" Cyclone Drilling Fluid Desander for Mud Circulating System Main Introduction Mud Desander is the second class solids control equipment in drilling operation. Generally, there are a set of hydrocyclones in 8”, 10” or 12” in the desander, which mainly used for separating... もっと見る
➤ 訪問 Webサイト
45 - 2つのハイドロサイクロンが付いている75um分離ポイント固体制御捨てるの円錐形
価格: Negotiable
MOQ: 1 Pc
納期: Within 20 days after deposit
ブランド: TR Solids Control
ハイライト:desanding equipment, sand removal system
45 - 75um Separation Point Solids Control Desander Cone with 2 Hydrocyclones Product Introduction TRCS Series mud desander is used as the 2nd stage of solids control for drilling fluids, which makes separations between 45 and 75 μm. Our Desander uses centrifugal pump to supply mud, then the mud ente... もっと見る
➤ 訪問 Webサイト
トレンチレス HDD 捨てるおよび脱毛器の泥のスラリーのリサイクルのためのハイドロサイクロンの捨てるの単位
価格: Negotiable
MOQ: 1 Pc
納期: Within 20 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, sand removal system
Trenchless HDD Desander and Desilter , Hydrocyclone Desander Unit for Mud Slurry Recycling Brief Introduction TRCS series desander overcomes shortcomings of the original sand removal process. The hydrocyclone of desander is provided with a rotating component, and its cylindrical wall is with a separ... もっと見る
➤ 訪問 Webサイト
捨てるの単位/固体をろ過する570KG/620KGはDesanding機械を制御します
価格: Negotiable
MOQ: 1 Pc
納期: Within 20 days after deposit
ブランド: TR Solids Control
ハイライト:desanding equipment, sand removal system
570KG / 620KG Filtering Desander Unit / Solids Control Desanding Machine Product Introduction Mud Desander is solids control equipment with a set of desander cyclone to separate sand from drilling mud in drilling rigs. Desander is installed on top of the mud tank following the shale shaker and vacuu... もっと見る
➤ 訪問 Webサイト
45um - 75um分離ポイントの300m3/h油田の鋭い泥捨てる
価格: Negotiable
MOQ: 1 Pc
納期: Within 20 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, desanding equipment
300m3/h Oilfield Drilling Mud Desander with 45um - 75um Separation Point Main Introduction TRCS series drilling fluid desander is a kind of hydrocyclone desander composed of hydrocyclone and shale shaker. It is the second class solid control equipment to treat drilling fluids, mainly used for separa... もっと見る
➤ 訪問 Webサイト
APIの交換可能な石油およびガスのあくことのための標準的なデリックのハイドロサイクロンのDesandingシステム
価格: Negotiable
MOQ: 1 Pc
納期: Within 20 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, desanding equipment
API Standard Hydrocyclone Desanding System for Oil and Gas Drilling Interchangeable Introduction Mud Desander is comprised of hydrocyclone, shale shaker and cyclone pipe. It is used as the second control equipment in drilling operation. It's mainly applied to separating solid particles with size 47... もっと見る
➤ 訪問 Webサイト
純粋なポリウレタン サイクロンが付いている適用範囲が広い容量のスラリーのクリーニングの鋭い泥捨てる
価格: Negotiable
MOQ: 1 Pc
納期: Within 20 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, desanding equipment
Flexible Capacity Slurry Cleaning Drilling Mud Desander with Pure Polyurethane Cyclone Introduction TR Solids Control is a main manufacturer of mud desander. Our TRCS series mud desander is a kind of hydrocyclone desander composed of hydrocyclone and shale shaker. It is the second class solids contr... もっと見る
➤ 訪問 Webサイト
退屈させる企業DesanderおよびDesilter純粋なポリウレタン サイクロン材料を積みます
価格: Negotiable
MOQ: 1 Pc
納期: Within 20 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, desanding equipment
Bored Piling Industry Desander And Desilter Pure Polyurethane Cyclone Material Introduction Mud desander is the second phase cleaning for a whole solids control system, It sits on mud tank for separate drilling cuttings 47-76 micron and above by centrifugal force. The untreated mud will feed into de... もっと見る
➤ 訪問 Webサイト
高容量の適用範囲が広い鋭い泥のDesanderの速い関係0.25 - 0.4mpa働き圧力
価格: Negotiable
MOQ: 1 Pc
納期: Within 10 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, desanding equipment
High Capacity Flexible Drilling Mud Desander Fast Connection 0.25 - 0.4mpa Working Pressure Introduction Mud Desander is the secondary solids control device for drilling fluids,it is mainly used to remove harmful solid particles with a particle size of 47-74μm in the drilling fluid.Using the princip... もっと見る
➤ 訪問 Webサイト
高性能の油田の鋭い泥のDesander 200 M3/H容量APIの証明書
価格: Negotiable
MOQ: 1 Pc
納期: Within 20 days after deposit
ブランド: TR Solids Control
ハイライト:desanding machine, desanding equipment
High Performance Oilfield Drilling Mud Desander 200 M3/H Capacity API Certificate Main Profile Mud Desander is the secondary solids control device for drilling fluids,it is mainly used to remove harmful solid particles with a particle size of 47-74μm in the drilling fluid.Using the principle of cent... もっと見る
➤ 訪問 Webサイト